how do u set lane change beep on 2026 highlander

To set the lane-change beep on a 2026 Highlander, go to the multi- information display settings, open LDA or Lane Departure Alert/Lane Trace Assist , then choose the alert options and switch the warning from vibration to beep. The menu path may vary a little by trim, but Toyota’s instructions for similar Highlander/LDA systems show that the alert type is changed in the LDA settings menu on the dash display.

Fast steps

1. Turn the vehicle on.
2. Use the steering-wheel controls to open Settings on the gauge display.
3. Select LDA or Lane Departure Alert.
4. Open Alert Options.
5. Pick Beep instead of vibration.

If you do not see it

• Some trims use Lane Departure Alert wording, while others combine it with Lane Trace Assist.
• The setting may be under Toyota Safety Sense or Driving Assist depending on trim.
• If the beep still does not sound, the system may be turned off or set to a different alert timing.

Helpful note

Toyota notes that exact menus can differ slightly by vehicle, so the owner’s manual for the 2026 Highlander is the best match for your trim.