US Trends

how much topsoil do i need

You can figure out how much topsoil you need with one simple idea:
Length × Width × Depth = Volume of topsoil you need.

Quick Scoop: Basic Formula

Use consistent units (all in feet or all in metres):

  • Measure the length of the area.
  • Measure the width.
  • Decide the depth of topsoil you want.
  • Multiply them together to get cubic volume.

In metres:

Volume in cubic metres=length (m)×width (m)×depth (m)\text{Volume in cubic metres}=\text{length (m)}\times \text{width (m)}\times \text{depth (m)}Volume in cubic metres=length (m)×width (m)×depth (m)

In feet:

Volume in cubic feet=length (ft)×width (ft)×depth (ft)\text{Volume in cubic feet}=\text{length (ft)}\times \text{width (ft)}\times \text{depth (ft)}Volume in cubic feet=length (ft)×width (ft)×depth (ft)

To convert:

  • Cubic feet ÷ 27 = cubic yards.
  • Many suppliers sell in bulk bags of about 0.75 cubic metres (a bit over 1 tonne).

How Deep Should the Topsoil Be?

Depth depends on what you’re doing:

  • New lawn (laying turf or seed): about 4–6 inches (100–150 mm).
  • General planting / borders : about 6–8 inches (150–200 mm).
  • Existing garden bed refresh : about 2 inches (50 mm).
  • Light topdressing of lawn : about 0.25–0.5 inch (6–12 mm).

Example:
If your lawn is 10 m by 15 m and you want 150 mm (0.15 m) of topsoil:

10×15×0.15=22.5 cubic metres10\times 15\times 0.15=22.5\text{ cubic metres}10×15×0.15=22.5 cubic metres

Handy Real‑World Examples

Here are a few ready-made scenarios to help visualize:

[3] [3] [3] [3]
Project type Area Depth Approx. volume Notes
Topdressing lawn 5,000 sq ft 0.25 inch About 3.9 cubic yards For light topdressing and overseeding.
New lawn 8,000 sq ft 5 inches About 123.5 cubic yards Full-depth preparation for new turf/seed.
Existing garden bed 32 sq ft 2 inches About 0.19 cubic yards Small bed refresh.
New raised bed 32 sq ft 12 inches About 1.19 cubic yards Deep bed for veg or shrubs.
Many suppliers say **1 tonne of topsoil is roughly 0.63 m³** , and a typical **bulk bag is ~0.75 m³** (just over a tonne), so you divide your cubic metres by about 0.75 to estimate the number of bulk bags and round up.

Mini Story: Visualizing the Pile

Imagine you’ve measured your new flower border: 6 m long, 1 m wide, and you want 0.15 m of topsoil.
Your calculation is 6×1×0.15=0.96\times 1\times 0.15=0.96×1×0.15=0.9 cubic metres. That’s just over one standard bulk bag , so you’d order 1 bag and know you’re covered with a little margin.

Quick Step‑by‑Step Checklist

  1. Measure length and width of each area.
  1. Choose depth (use the guide above).
  1. Multiply for cubic metres or cubic feet.
  1. Convert to cubic yards or bulk bags/tonnes using your supplier’s guide.
  1. Round up slightly so you don’t end up short. Many online calculators do this for you.

Information gathered from public forums or data available on the internet and portrayed here.