US Trends

how to clean amtico flooring

Cleaning Amtico flooring is straightforward if you stick to a few simple rules and use the right products. Amtico is a luxury vinyl tile (LVT) , so it’s tough and water‑resistant, but harsh cleaners, excess water, and abrasive tools can dull or damage the finish over time.

Quick daily / weekly routine

  • Sweep or vacuum first
    Use a soft‑bristle broom or a vacuum with a hard‑floor setting (no beater bar) to remove dust, grit, and pet hair.
  • Damp‑mop with a pH‑neutral cleaner
    Mix a pH‑neutral vinyl‑safe cleaner (or Amtico Floorcare Maintainer) with warm water, wring the mop well, and mop in “S” or figure‑eight strokes.
  • Rinse and dry
    Follow with a second pass using clean water, then dry with a microfiber cloth or dry mop to prevent streaks and water marks.

Best products to use

Product type| What to use| What to avoid
---|---|---
Daily cleaner| Amtico Floorcare Maintainer or any pH‑neutral LVT‑safe cleaner. 36| Bleach, ammonia, vinegar, or strong alkaline cleaners. 19
Mop & pads| Microfiber mop and pads; soft‑bristle broom. 13| Steel wool, scouring pads, or stiff brushes. 14
Deep‑clean system| Amtico Floorcare Stripper + Dressing (or equivalent LVT stripper/dresser) once a year. 37| DIY stripping with harsh chemicals not designed for LVT. 3

Deep‑cleaning once a year

For heavily trafficked areas or if the floor looks dull:

  1. Sweep thoroughly.
  2. Mix Amtico Floorcare Stripper (or similar) as directed and apply with a mop; leave on for about 10 minutes without letting it dry.
  1. Rinse twice with clean water and dry completely.
  2. Apply Amtico Floorcare Dressing (or compatible LVT dressing) in two thin coats, brushing in opposite directions for an even sheen.

This process removes ingrained dirt and the old finish layer, then restores a fresh, protective coating.

Stains, spills, and problem spots

  • Spills (food, drinks, oils)
    Wipe up immediately with a damp cloth and a small amount of pH‑neutral cleaner; rinse and dry the area.
  • Stubborn marks
    Spot‑clean with a slightly more concentrated cleaner or a dedicated vinyl‑safe stain remover, then rinse and dry.
  • Heels marks / scuffs
    Use a soft cloth with a bit of cleaner or a vinyl‑safe scuff‑removal product; avoid scrubbing hard.

What not to do

  • Don’t use steam mops , excessive water , or wet‑vac systems that leave standing water.
  • Avoid wax‑based polishes or products not labeled for LVT / vinyl.
  • Don’t drag heavy furniture or use dirty mop pads, as grit can scratch the surface.

Why this matters now (2026)

Amtico and other LVT floors remain very popular in homes and commercial spaces because they look like stone or wood but are easier to maintain. Using the right cleaning routine helps preserve the warranty, keeps the floor looking “as‑new,” and avoids the need for early replacement.

Information gathered from public forums or data available on the internet and portrayed here.