how to draw flames easy

To draw flames easy, start with a simple tear-drop base, then build wavy, pointed shapes inside it and layer warm colors from light (yellow) to dark (red). This works for tiny cartoon flames or bigger fire drawings.

Basic flame shape

• Draw a tall tear-drop or ellipse for the overall size of your flame. Keep it wider at the bottom and narrow at the top.

• Inside that shape, draw one main curved flame that’s pointed at the top and rounded at the bottom, like a stretched water drop.

• Add 2–3 extra “spikes” or tongues of flame around the main one, varying their height and curve so they don’t look perfectly symmetrical.

Making multiple flames

• Repeat the same curved, pointed shapes on each side of the main flame, making each new flame slightly shorter or lower so they overlap nicely.

• Keep the tips sharp and narrow, and let the bases overlap so it looks like one big, connected fire instead of separate pieces.

• Add a few tiny flicks or sparks coming off the tips to make the fire feel more lively and dynamic.

Easy coloring and shading

• Fill the inside of the flames with yellow first; this is the brightest, hottest part, usually near the center or bottom.

• Add orange over the upper parts of the flames, letting some yellow show through near the center or tips you want brightest.

• Use red around the outer edges and between flame tongues to deepen the color, and add a bit of darker shading at the bottom or behind the flames for contrast.

Quick step-by-step recap

1. Sketch a tall tear-drop or ellipse as a guide.

2. Draw one big inner flame (curved sides, sharp tip, rounded base).

3. Add 2–4 more flame spikes around it, each a bit different in height and direction.

4. Erase the outer guideline so only the flame shapes remain.

5. Color: yellow inside, orange in the mid areas, red on the outer edges; add a darker background or base if you like.

Little practice tips

• Flames rarely look perfectly even, so let some curves lean left or right to keep them natural.

• For a “fire emoji” look, keep the outline simple, chunky, and smooth, with clear yellow, orange, and red layers.

• Try a page full of quick mini flames—spend 10–20 seconds on each—to loosen up your hand and find shapes you like.

TL;DR: Use a tear-drop base, stack wavy, pointed curves inside it, then color from yellow (inside) to orange to red (outside) for an easy but convincing flame.

Information gathered from public forums or data available on the internet and portrayed here.