how to pour chemical guys soap in bucket for container
Pour Chemical Guys soap into the bucket with water , not into a dry container, and add it slowly so it mixes evenly. For a basic wash setup, Chemical Guys shows using about 2 ounces of soap in the wash bucket, while a foam or bucket product guide suggests 1 to 3 ounces depending on the product and dirt level.
Simple bucket method
- Fill the bucket with clean water first.
- Add the recommended amount of soap.
- Swirl the water with the hose stream or a wash mitt to build suds.
- Use a second bucket of plain water for rinsing your mitt if you are doing the two-bucket method.
If you meant a storage container
If you are transferring soap from a gallon jug into a smaller container, a funnel or pump is the cleanest approach. Chemical Guys recommends a funnel for thinner liquids and a gallon pump for thicker soaps, and says the pump can also dispense soap directly into a wash bucket.
Quick caution
Do not pour soap into an empty bucket and then blast it with a strong water stream, because that can splash and waste product. A calm fill-first approach is easier to control and is the safer, less messy method described in the product guidance.
TL;DR: Fill the bucket with water first, then add Chemical Guys soap, usually around 2 ounces for a standard wash bucket, and mix gently.