how to turn on noise cancellation in hollyland lark m2
Turn on the yellow button on the transmitter (TX) of the Hollyland Lark M2 once, after the TX and RX are powered on and paired. The indicator should turn solid green when noise cancellation is active, and press the same button again to turn it off; the light returns to blue.
Steps
- Take the TX and RX out of the case and let them pair.
- Make sure the mic is connected to your phone/camera/receiver.
- Press the yellow button on the TX once.
- Check the light: green = noise cancellation on , blue = off.
App control
If you use the LarkSound app, open it while the system is connected and toggle NC or NC level there. Some guides mention you can choose stronger or weaker noise cancellation in the app.
Small note
For the camera receiver version, the easiest and most reliable way is still the button on the TX.
Should I also give you the exact button-and-light guide for the phone receiver vs. camera receiver?