where is the sim card in zebra tac67967 printer

The SIM card in a Zebra device is usually not in the main body like a computer part; it’s behind a small access cover or in a SIM tray near the battery compartment. On Zebra handhelds, the card is often installed by removing the back cover and battery, then opening the SIM holder or drawer and placing the SIM in the slot with the contacts facing the correct direction.

What to look for

• A small SIM tray/drawer or card holder under the rear cover.

• In some models, a locking screw or access door must be removed first.

• The slot is typically near the battery area, not on the printer’s outside shell.

Important note

Your model name, “tac67967,” does not match a standard Zebra printer model from the sources I found, so the exact SIM location may differ depending on the real model. Zebra’s printer support pages confirm that model-specific instructions are needed for printers.

What to do next

• Check the label on the device for the exact Zebra model number.
• Look for a rear access panel, battery compartment, or SIM drawer.
• If it is a printer with cellular support, the SIM slot is usually inside a service panel rather than exposed externally.

If you send the exact model number from the label, I can give the precise SIM location.