The parallel parking space for a driver’s test is usually around 8 feet wide and 24–25 feet long , but it varies depending on where you take the test. Always check your local testing office or DMV, because they may use slightly different dimensions or not specify an exact size at all.

Typical test space size

Most standardized driver’s tests in the U.S. use a space roughly in this range:

  • Width: 7–9 feet
  • Length: 20–25 feet

A commonly recommended practice setup is:

  • 8 feet wide by 25 feet long as a good “average” space to simulate many states’ exams.
  • Some states publish specific dimensions, like 8′ × 24′ (Pennsylvania) or 10′ × 22′ (Georgia).

Why it varies

  • Each state or region sets its own rules, and some do not publish exact measurements at all.
  • Examiners may adjust cone spacing or use real cars, so the exact space can differ slightly even within the same state.

How you should practice

If you don’t know your exact local dimensions:

  1. Set up cones or markers 8′ × 25′ and practice until you are comfortable.
  1. If your DMV lists official dimensions (often on their website or handbook), match those measurements.
  2. Aim to finish about 6–12 inches from the curb without hitting cones or crossing lines, which is a common expectation.

Quick forum-style note

For practice, many instructors and online guides suggest: “If you can consistently park in an 8 by 25 space without touching cones, you’re in good shape for most driving tests.”

Bottom note: Information gathered from public forums or data available on the internet and portrayed here.