How to turn it on

For the Techko SH52408 OD shredder, the usual way to power it on is to:

  1. Plug it into a working outlet.
  2. Make sure the shredder basket is seated correctly.
  3. Set the switch to ON or AUTO , if your model has that setting.
  4. Feed paper into the slot to trigger the auto-start sensor.

A Techko manual listing and related support pages indicate that Techko shredders use standard power-switch and auto-sensor operation, and users troubleshooting “won’t turn on” issues are commonly advised to verify the switch position and power connection first.

If it still will not start

Try these checks in order:

  • Confirm the outlet works by testing another device.
  • Reseat the shredder head/bucket assembly if the unit has a safety interlock.
  • Look for a jam, because some shredders refuse to run when the cutters are blocked.
  • Check whether the unit has overheated and needs time to cool down.
  • Inspect for a reset button on the underside or back, if present.

General Techko troubleshooting references mention power-switch engagement, motor reset checks, and jam-related nonstart problems as common causes.

Safety notes

Do not put fingers, jewelry, or loose clothing near the feed slot, and unplug the shredder before clearing jams. If the motor hums, smells hot, or trips power repeatedly, stop using it and let it cool or have it serviced. The product manual sources linked for this model category also include safety notes for proper operation.

What to look for

If you want the exact on/off steps for your specific unit, check for:

  • A 3-position switch labeled Off, Auto, and Rev.
  • A basket-position sensor.
  • A reset switch or thermal protector.
  • A model sticker confirming SH52408 OD.

That model family is listed among Techko paper shredder manuals, but the exact control layout can vary by version.

Meta description

How to turn on the Techko SH52408 OD shredder: plug it in, set the switch to On or Auto, seat the bin correctly, and feed paper to trigger auto-start.

TL;DR

Turn it on by plugging it in, making sure the bin is seated, and switching it to AUTO or ON ; if it still does nothing, check for a jam, overheating, or a reset issue.