Drywall is mostly made from a soft mineral called gypsum (calcium sulfate dihydrate), formed into a flat core and sandwiched between thick sheets of paper or fiberglass mat.

What is drywall made of?

At its simplest, when people ask “what is drywall made of” , they’re talking about standard gypsum drywall used for most interior walls and ceilings.

A typical sheet includes:

  • Gypsum core (about 90% of the board by weight)
  • Paper facer (the smooth front side you paint)
  • Paper backer (the rear side against studs)
  • Small amounts of additives to tweak performance (fire resistance, moisture resistance, mold resistance, etc.)

Gypsum itself is a naturally occurring mineral composed of calcium, sulfur, and water (chemically: calcium sulfate dihydrate). This built‑in water content gives drywall its characteristic fire resistance, because the water must evaporate before the board will burn through.

Core ingredients, broken down

Here’s a quick look at what’s inside a standard gypsum drywall panel.

[3][5][7][1] [1][3] [7][1] [7][1] [3][1][7] [1][7] [3][7][1] [7][1]
Component What it is What it does
Gypsum core Calcium sulfate dihydrate mineral, finely ground and re‑set into a solid sheet.Provides structure, thickness, and natural fire resistance.
Paper facer Heavy specialty paper on the front surface.Gives a smooth finish for paint or texture and helps bond joint compound.
Paper backer Heavy paper on the back side of the panel.Holds the gypsum core and adds flexibility and impact resistance.
Additives Starches, foaming agents, glass fibers (in fire‑rated boards), and other modifiers in small amounts.Adjusts properties like fire resistance, sound performance, weight, and moisture resistance.

Different types of drywall and what changes

When you see different “colors” or labels at the store, it’s usually the same basic gypsum‑and‑paper structure with specific tweaks.

  1. Standard (regular) drywall
    • Gypsum core + paper on both sides.
    • Used for most interior walls and ceilings in dry areas.
  1. Moisture‑resistant (often “green board” or purple board)
    • Similar gypsum core, but the paper and additives are treated to resist moisture and mold.
 * Used in bathrooms, basements, and other damp locations (not inside actual shower stalls without extra protection).
  1. Fire‑resistant (Type X and Type C)
    • Gypsum mixed with glass fibers and other additives to slow heat transfer.
 * Required around garages, furnace rooms, and in fire‑rated walls and ceilings.
  1. Paperless (fiberglass‑faced) drywall
    • Gypsum core wrapped in fiberglass mat instead of paper.
 * Better resistance to mold and moisture because there’s no paper food source for mold.
  1. Sound‑damping drywall
    • Often a gypsum core combined with extra layers or viscoelastic polymers.
 * Designed to reduce sound transfer between rooms.

How it’s made (quick story version)

You can picture the drywall production line as a long “gypsum sandwich” factory:

  1. Gypsum rock is mined or sourced from industrial by‑products, then crushed and heated to drive off some of its water.
  2. It’s mixed with water again and with additives to control set time, strength, density, and fire performance.
  1. This slurry is poured onto a moving sheet of paper, then covered with another sheet of paper on top – like making a continuous sandwich.
  1. The long strip is flattened to a set thickness, allowed to set, cut into boards, and then dried in large kilns.
  1. Once dry, the panels are trimmed, stacked, and shipped out to become walls and ceilings.

You end up with a panel that feels solid, but is relatively light, easy to cut with a knife, and smooth enough to finish quickly – which is why drywall largely replaced old‑school lath and plaster in the 20th century.

Quick SEO notes (for your “Quick Scoop” style)

If you’re building a post around “what is drywall made of” , the clearest one‑sentence answer is:

Drywall is made from a gypsum (calcium sulfate dihydrate) core, typically about 90% of the board, sandwiched between heavy paper or fiberglass facings, plus small additives for fire, moisture, or sound performance.

You can then branch into:

  • A short list of main components (gypsum, paper, additives).
  • A mini‑section on types (standard, moisture‑resistant, fire‑rated, etc.).
  • A brief “how it’s made” story like the one above.

Meta description idea (under ~160 characters): Drywall is made from a gypsum core pressed between heavy paper or fiberglass, with additives for fire, moisture, and sound control. Learn what’s inside your walls.

Bottom note: Information gathered from public forums or data available on the internet and portrayed here.